Design of a kitchen with MDF panels

The walls of the kitchen can be decorated in any style and direction. Such material as MDF panels for the kitchen is in demand and popular, due to the practicality and aesthetics of the appearance. Walls above the washing level and surfaces are always subject to pollution, splashing grease. To successfully resolve this issue, you need to select the best option for designing a kitchen apron.

Decorative panels based on MDF are budget finishing materials

Design of a kitchen room with MDF panels (selection of photos)

Modern material is made in different styles and with different textures. One of the demanded are laminated or veneered models that are made under natural wood: pine, alder, mahogany, maple. The surface can be any - gloss or matte, optionally decorated with an image (photo printing or 3D effect).

In the interior of the kitchen, MDF panels can be used for full or partial cladding of walls, ceilings and other surfaces

The panels made "under a stone" are not inferior. The material is performed in different interpretations, there are even models for metal or glass. “Openwork” sheets look beautiful and neat. If desired, they can be combined with any finish. Using MDF panels for the kitchen is beneficial, as it is not only practical, but also very beautiful. Natural wood can crack from moisture and steam, this can not be on artificially created smooth panels.

MDF material - what is it

What does MDF mean? The abbreviation is translated as "finely divided fraction." In the manufacturing process, wood fibers are used, with average density indicators. They are pressed together under high pressure and temperatures. To make the panels stronger, there is a binding component in the composition - resin. Models of the standard type are manufactured at the factory, but you can get the necessary sizes for an individual order.

Wall panels are sold fully ready for installation and can be painted, laminated or veneered

Advantages and disadvantages of MDF as a finishing material

MDF panels for the kitchen have the following advantages:

• for installation, you do not need to pre-prepare the surface;
• the finish is excellently polished, does not crumble;
• environmentally friendly material, does not harm human health;
• it is quickly and simply washed from dirt and dust, and during installation there is no debris and waste;
• good price-quality ratio, availability for anyone who wants to make repairs;
• finishing can be done on their own, without the involvement of craftsmen.

MDF panels are available in a huge assortment of design solutions - you can choose imitation stone or wood, or choose material to match the countertops

There are also disadvantages:

• the panels are not "friendly" with moisture in large quantities and negatively perceive temperature changes;
• if you do not cover the material on top with a special fire fighting device, there is a risk of fire;
• MDF sheets of small thickness can easily be damaged as a result of transportation or mechanical stress.

Such panels are equally well suited for walls and ceilings, while their installation does not require careful alignment of surfaces

Types of panels

According to their technical characteristics, panels can be divided into such categories.

1. Laminated - there is a PVC film on the surface, such a coating is resistant to pollution, ultraviolet and has different structures.
   

   Laminated products often repeat the color and texture of natural wood.

2. All-pressed - made by hot pressing. The density of the products is medium, smooth surface.
   

   All-pressed panels have a smooth surface without decorative finishes and are used when you need to create an unusual interior - such panels can be painted in the desired color

3. Veneered - veneer made from expensive varieties of wood is used.
   

   The surface of veneered panels is often indistinguishable from real wood.

4. Paneled - there are no polymers in the composition, exclusively natural species of trees.
   

   Panel panels can often be found in classic interiors.

5. Painted is the most popular option among frequently used ones. Quality depends on the paint.
   

   The surface of the painted panels can be matte or glossy.

6. Resistant to moisture - in the manufacture of used dense high-quality raw materials, which are not afraid of temperature changes. This material is ideal for decorative finishes, you can use a different method of decorating the front.
   

   Moisture-resistant panels are an excellent alternative to ceramic tiles.

MDF panels with photo printing

Equipped kitchen apron - it is convenient, practical and beautiful. In the process of cooking, splashing of fat or liquid may occur, so this area should be easily washed, neat and always maintain a neat appearance. Photo printing is original, your kitchen will be unique, because you can choose any image. How is it applied to the surface of an MDF board:

1. A film with a pattern to stick to the surface of the panel is an inexpensive and short-lived method. A little humidity and temperature difference - and it can come off.
2. The image is glued onto acrylic plastic and covered with varnish - the quality is better, but the method is more expensive.
3. The film is applied to MDF, several layers of varnish with gloss are applied on top. Often used "hot cladding."

When buying panels with photo printing. it is worth finding out by what technology the pattern was applied on the MDF

MDF kitchen facades can be matte, glossy or embossed (bamboo, stone or wood). There is a minus: the surface is difficult to clean from grease and dirt.

Other

Panels from this material are classified into several categories:

• Large sheet panels.
  

  Sheet material used for seamless wall cladding

• The elongated and narrow rails are racks.
  

  Rack panels in shape resemble a wooden lining and often imitate it.

• A square or rectangular shape characterizes the tiled type.
  

  Square panels look interesting on the ceiling

Choose a design

Kitchen panels from high-quality MDF are distinguished by a large assortment, different designs. You can buy for every taste: ash, wood shavings, imitation stone, brick. Focus on a well-known manufacturer: this will always help you choose a good material.

Wall panels must be selected taking into account the design of the kitchen as a whole and the headset in particular - you can focus on the color and texture of facades, countertops, flooring or curtains

Before opting for a separate option, consider the type of coating with which the plates are produced:

• laminate;
• paper;
• veneering;
• water repellent surfaces.

Interesting solutions in the interior design of a private house and apartment (selection of photos)

Thanks to the large assortment, you can beautifully decorate any room, and the variety of textures helps to create truly stylish compositions. Textures “under a tree” or natural stone look spectacular. When choosing MDF sheets, consider the functionality of the space and zoning. If the kitchen is made in a classic style, you can focus on brightness, add creativity. The combination of light and dark shades looks good.

A successful combination of solid wood worktops and wall sections in the dining area with wood paneling

In the kitchen combined with the dining room, you can combine the lining - the lower part is decorated in dark color, add pastel or on top. You can use a wooden plank to emphasize the contrast. Striped trim visually expands the space. A good option is laminated panels under natural wood or stone. Veneered slabs are close to the tree in structure - they look spectacular and beautiful.

The classic solution for the interior of the kitchen is a dark bottom and a light top

Using MDF panels you can create a unique and extraordinary interior

MDF boards are of good quality compared to ceramic tiles - they are easy to maintain and look much more spectacular and more expensive. If you select several options for shades, you can interestingly zoning the space, highlight the lunch and cooking area. Partitions decorated with wall panels look good. Here you should prefer veneered or varnished surfaces. Kitchens from MDF panels with photo printing look very original, photos of which can be viewed for inspiration on the Internet.

Wood paneled decor in the kitchen dining area

How to choose a good panel from MDF

The material is relatively inexpensive, but it is important to pay attention to quality. How to understand what material is considered good:

1. There must be a quality certification - you have every right to ask for a document at the time of selection. If it is, then the material contains no harmful components (resins and formaldehyde).
2. There can not be many defective elements in the party - this indicates a low quality.
3. The colors of the products should be the same, and the coating should be uniform.

Well-known manufacturers, as a rule, value their reputation and produce quality products. It’s better to overpay for a brand than run into a material that will wear out after a while and start to smell like formaldehyde

MDF boards are distinguished by good characteristics, naturalness and safety. This is a good option for finishing the kitchen surface, which is not only high-quality, but also very attractive in appearance.

Video: installation of MDF sheet panels without lathing

Photo: MDF panels in the interior of the kitchen