How to choose a floor stand for a kitchen sink - design ideas

Every housewife knows how important it is to have a large and convenient sink in the kitchen. However, an empty sink, which does not hide plumbing engineering, will look very strange and ugly. Correct this point can only be a sink for the kitchen, which at the same time will be able to perform the function of storage. About what are the nuances, and how to choose it, you have to find out now.

The best choice is the cabinet under the sink for the kitchen, which is distinguished by functionality and compliance with the existing kitchen set.

Features of placing a kitchen sink in the headset

Speaking about the features of the cabinet under the sink in the kitchen, you can highlight not only its shape, but also a number of other nuances. Among them, one can single out separately such.

1. Surface material. Most often, this is a standard countertop that occupies the entire working perimeter of the kitchen. If it is not of high quality, after the first stagnation of water, it will swell and lose its appearance.
2. Type of construction. If the old models performed only the function of aesthetics, today the cabinet can accommodate a large number of gadgets.

A sink with a kitchen table provides not only the convenience of using the sink for its intended purpose, but also guarantees the creation of an attractive and holistic interior.

Due to the characteristics of small kitchens, it is very difficult to choose modules so that they take up little space, but remain roomy. Therefore, a modern washbasin cabinet should organically fit into any space.

Conventional designs that are not equipped with cabinets are considered not too beautiful, so they are difficult to fit into the interior of the kitchen.

What to look for when choosing a bedside table for washing

The first thing you should pay attention to when choosing a kitchen sink and drying with a cupboard is the material from which it is made. Experts recommend giving preference to more expensive models that are resistant to moisture and moisture.

This part of the module will be most exposed to water.

Among the obvious nuances, others can be singled out separately.

1. The design must be stable. This means that the frame and even the prefabricated set must be made of high-quality metal.
2. Experts recommend giving preference to solid wood materials. However, among the cheap options you can choose only chipboard.

If the manufacturer correctly selected the special impregnation, the bedside table will be able to last quite a long time.

An important nuance is the design cover. When it comes to cheaper models, the frame and the outer part will not be able to withstand even a standard wash. Therefore, it is recommended to give preference to that coating that can withstand the influence of chemicals and water.

The walls of the bedside table act as support for washbasins, since under the influence of a significant pressure of water, significant loads act on the sink.

How to choose a kitchen cabinet for a sink: types of designs and selection criteria

The choice of a bedside table for a kitchen sink depends on the overall design of the kitchen and the location of the equipment. Most often, the sink is located in the corner of the kitchen, so you will have to select the design to the level of the slope. Not all apartments have perfectly even angles, which creates quite a few problems when it comes to an early purchase.

The cheapest way is to make a custom cabinet, given the design of the entire room and module.

L-shaped (with an acute angle)

This type of design is more suitable for those who want to create a working area without limiting the space for household appliances. Buy in the finished version is not difficult.

Such a cabinet will come already complete with the module.

A problem can arise when the hostess needs one side to be smaller than the other. For example, you need to install a refrigerator near one wall so that you can use the switch. Only one of the parties will have to be reduced. It is impossible to do it manually, since not only the appearance of the nightstand, but also the whole concept of the kitchen will be violated.

The only option is to make the entire module on order.

Trapezoidal (with a beveled corner)

The main advantage of this form is that it will allow you to properly organize the space for storage of the necessary devices. Most often, in this design, the manufacturer installs a special compartment for storage. This can be reflected in the presence of a special "carousel", and in vertical shelves.

The underframe makes it possible to hide the ugly sewer and heating pipes.

This option is well suited for kitchens with an average area. The trapezoid looks pretty weighty. However, it is she who will make it possible to arrange a large and deep sink, which is so lacking for large families.

These lower curbstones are considered the most capacious among all varieties.

Triangular

This is ideal for small kitchens. Such a design can easily fit into an existing module and it is quite simple to do it yourself. There are a few drawbacks.

1. Due to the small size it will not be able to accommodate a large number of additional shelves.
2. Manufacturers rarely guess with the sizes, so you have to do it to order.

Such a kitchen cupboard is adjacent to two walls of the room, perpendicular to each other.

Corner cabinets used to be in every typical kitchen. Therefore, citizens relate to it with confidence. The main advantages: small, comfortable, suitable for a small room.

The corner washbasin is considered the ideal solution for a small room.

Types of designs of kitchen cabinets for washing: forms

Speaking about the cabinets in the kitchen, there are several win-win options. The choice of owner should be based on ergonomics and on the concept of the design of the room. Moreover, before purchasing a ready-made module, you must definitely prepare all the plumbing engineering for it.

The difference between such a sink for the kitchen with a cupboard is the presence of a wide countertop.

Corner

A corner kitchen cabinet for a sink is an ideal option for those who want to combine a sink with a work surface. In fact, it can be either a separate table in the form of a bar, or an adjacent part next to the wind surface.

Even this underframe can be equipped with different elements for storing dishes, vegetables or other items.

This type of construction is different in that it is able to accommodate a huge amount of kitchen utensils. Many furniture manufacturers initially take as a basis the presence of several levels where the hostess can place either a dishwasher or arrange a place for storing cutlery.

Straight

A straight curbstone is rather a classic. If the room is large and the owner can afford to install a sink in the middle of the module, then this option should not be abandoned.

It is considered optimal for the use of internal space.

The main feature is that today you can choose absolutely any design. In this case, the choice of the future owner is not limited.

Optimum dimensions of the kitchen sink (50, 60 or 80 cm)

It is rather difficult to answer the question about the size of the sink. If you go deeper, you can distinguish several factors.

1. The sink should be selected according to the number of people in the house. If there are many relatives, then you need to take a deep and roomy sink, which will help to cope with the volume of cooking, etc.
2. The size of the kitchen. A large wash can cause an increase in the module itself. If it is too large, then precious space will decrease. The hostess will simply not be able to turn around once again.

The most popular nightstands for kitchen sinks are straight or corner models.

It is also worth noting that experts do not recommend installing a sink directly on the border of the frame. Due to constant moisture, it may burst, resulting in a small accident or deformation of the entire countertop.

It is desirable that the protrusion is 5-6 cm, even if it is a corner cabinet in the kitchen. Therefore, it is advisable to purchase a sink after the stand has been selected.

Ways to install a sink in the nightstand

There are only 2 main ways to install a sink. The first option is related to a surcharge to the collector who will come to collect the module. The specialist already has the necessary sawing tool that will help him make a straight hole. The owner does not need to take any measurements.

Such cabinets for a kitchen sink are considered traditional, therefore they are available in different shapes and sizes.

The second option is associated with the self-installation of the sink in the purchased cabinet. It is worth noting that not all modules are designed for such a load, so it is advisable to either assemble it yourself or check with the manufacturer in advance.

For self-installation you will need.

1. Sealing glue - a cabinet under the sink and dryer for the kitchen, will have to be processed from the inside and outside.
2. Jigsaw on wood.
3. Tape measure and pencil.

There is free access to the internal space of the structure.

If there is a wood jigsaw in the house, then most likely there will be a special gun for the sealant. Before you start to cut something, it is better to make markup. From the edges should be at least 5 cm, only this will ensure the stability of the future design.

What material to choose for the manufacture of a cabinet for washing

Due to the specifics of using a sink, attention must also be paid to the material from which it will be made. In order not to get into an unpleasant situation, it is necessary to disassemble the most relevant options.

Inexpensive direct bedside tables are products made from solid pine.

1. An array of a real tree is far from a budget option, however, if you can get it, it is advisable to use it. A module made of this material will last more than a dozen years.
2. Chipboard is an inexpensive alternative to an array. There is one very important feature - a wide palette of shades.
3. MDF - consists of wood chips. A fairly dense material, if the manufacturer did not violate the instructions, will be able to last longer than the LSP. Differs in big weight, such material cannot be installed on a balcony if there is a redevelopment.
4. Particleboard is a cheaper and lighter material. Today, manufacturers are trying to treat it with a special composition that repels moisture.

Which option to choose, only the owner decides.

It is necessary to proceed not only from the budget, but also plans for the future. After all, it’s better to buy a decent option from an array with a stand once, than after 5-7 years to think about replacing the entire kitchen again.

What countertop to choose for washbasin cabinet

Usually the countertop under the sink and under the work surface is the same.Therefore, when choosing a countertop for domestic work, it is advisable to consider the fact that it will be under the sink. This means that saving on this part of the module will fail.

The cost of direct structures is not considered too high.

Among the main ideas are the following.

1. Acrylic stone - on the market today you can find an artificial version of the countertop, which will look very impressive in any kitchen. There are several significant advantages: it is cheaper than stone, a wide palette. Of the minuses, we can distinguish that acrylic does not withstand high temperatures.
2. Agglomerate is an artificial type of stone. Unlike acrylic, it is not afraid of high temperature and easily withstands work in water. It looks very natural, but weighs much lighter.
3. Natural stone - suitable only for an expensive array. A stand made of solid wood can support the weight of the stone. This is a real classic, which costs decent money.
4. Laminated chipboard - a budget option. This material must not be poured, therefore it is advisable to wipe the surface dry after each dishwashing. After six months, the first scuffs will be visible.
5. Laminated MDF - as if sellers were not convincing, know that this option swells very quickly.

The modern market allows you to choose the right model for any kitchen.

You need to choose a countertop for years to come, because it is this part of the kitchen that is the “workhorse”. It is she who is most often exposed to dampness, cuts, etc.

Features of the internal filling of kitchen sinks and storage systems

If the owners go to make the bedside table roomy and ergonomic, it is advisable to develop your own design drawing. Making a custom cabinet is not as expensive as it might seem.

The final cost will depend on the material and the additional headset.

Today, most often you can find a module inside which there is a built-in dryer for dishes. If there are no upper cabinets in the kitchen, then such a device will be very useful. Dust will not accumulate on the dishes, but you will have to constantly bend over. You can get rid of unnecessary movements only if the dryer has a retractable bracket.

It is always worth remembering that the main task of any module is related to multifunctionality.

Each piece of furniture in the kitchen should at least perform several functions. Therefore, instead of drying under the sink, you can easily install storage for less used devices: combines, etc. Among the types of boxes you need to remember that there are:

1. carousels - a convenient design that allows you to place small things;
2. mesh baskets - for chemicals and rags;
3. a compartment for storing bottles, it can even be your own wine cellar.

There are no separate rules in this case. The main thing is for the cabinet to be spacious.

VIDEO: Assembly of a corner sink for the kitchen with your own hands.

Ideas for design of a washbasin cabinet

One of the most effective options for a large pedestal is to make a multifunctional module that can store a huge number of devices, utensils, etc. You can get acquainted with the ideas on the proposed photos of transformer cabinets under the sink in the kitchen.

Before you start choosing the right module, it is advisable to distribute the funds that the owners are willing to spend on kitchen equipment. Sometimes it’s better to save on the assembly of the module than on the material. Moreover, acquiring a strong and high-quality design, it will be possible to think about replacement only after 15 years. Therefore, it is very important to choose the right design, which will be relevant for many years to come.