Facade options for the kitchen

How to choose a facade for the kitchen? The question, indeed, is not an easy one, especially considering the variety of options on the market. The choice should be practical and at the same time aesthetic.

When choosing furniture for the kitchen, you need to pay close attention to the material from which it is made

Miscellaneous Materials: Pros and Cons

The modern market offers different types of kitchen facades. Before making a choice, you need to study the question well to understand which of the many options for kitchen facades is better.

MDF

MDF - if you translate the abbreviation into Russian, then the translation will be something like this: “medium density fiberboard”. There are several varieties of facades made of this material.

The base of MDF can be painted, coated with decorative material and may even be milled

PVC coated MDF

Such a film protects the surface from moisture, possible deformations and sunlight, plus it is easy to clean. Its appearance often imitates natural materials: marble, granite, etc. It can also be matte, glossy or with a pattern.

Facades with PVC film - the most affordable and very attractive, but most susceptible to wear

Pros:

• relatively affordable price;
• wide selection of textures and colors;
• resistant to moisture and temperature;
• easy to clean.

Minuses:

• if examined in detail, it may look slightly worse than a surface made of natural materials;
• peeling of the film under the influence of high temperatures is possible;
• burnout due to direct sunlight;
• with mechanical Exposure to scratches is very likely.

MDF painted

These are plates with several layers of furniture enamel and fixed with a layer of varnish. Thanks to this technology, it is possible to achieve truly bright and saturated colors, plus lacquer gloss adds a spectacular look to the kitchen. Enamel can be used to achieve the effect of gloss, dullness, mother of pearl or metallic effect.

A set with rounded doors costs 10-15% more expensive than furniture with straight facades

Pros:

• aesthetic appearance;
• wide selection of colors and textures;
• wide selection of geometric shapes;
• the ability to restore the surface.

Minuses:

• more expensive than film coating;
• under the influence of the sun, the best colors can become dull;
• easy to scratch;
• Abrasive and active alkaline cleaners are not suitable for cleaning.

Veneered MDF

Appearance is very similar to expensive facades made of wood, so it is especially popular among facades in the expensive segment. Veneer is a cut of a tree of valuable species, it is he who is facing the base of the facade (MDF board). This type can be safely chosen for interiors in a classic style.

Facades with veneer cladding are not externally indistinguishable from wooden, but are much cheaper

Pros:

• aesthetics of appearance;
• cheaper than an array;
• more resistant to moisture than solid wood;
• resistant to mechanical stress.

Minuses:

• more expensive than other options;
• poorly made facade can stick out over time;
• under the influence of color and moisture will change color.

High gloss MDF

Butt ends - the weakest point of furniture from MDF and the main indicator of the quality of the headset

Pros:

• smooth mirror surface;
• a variety of decor in brightness and saturation;
• color fastness;
• leader in strength;
• ease of care;
• the ability to repair damage and scratches.

Minuses:

• high price;
• color may not be very stable with poor quality.

UV coated MDF

Also a popular variety for the kitchen.

This is the most expensive kind of MDF facades, sometimes more expensive than solid wood

Pros:

• perfectly flat surface;
• options for choosing a bright and rich decor;
• color fastness of a very high level;
• no shagreen;
• very high strength;
• ease of care.

Minuses:

• high price.

Solid wood

Wood is still the most popular natural material, despite the fact that today it has many alternatives. To increase the service life, you can treat the surface with special varnishes and septic tanks. The basis of the material can be natural oak, ash, pine and many other trees.

The tree is capricious and expensive, but allows the restoration of minor damage

For wooden facades of economy class, soft species are used - pine, spruce or alder

Pros:

• aesthetics of appearance;
• high level of resistance to mechanical damage;
• the ability to restore the surface in case of damage, by applying a layer of varnish or staining;
• the only option for some interior styles (such as country or chalet).

The best and most durable facades are made from hardwood - ash, oak, walnut, beech or cherry

Minuses:

• high price;
• much heavier than MDF;
• high probability of color loss when exposed to sunlight;
• swelling or drying out of the tree due to moisture or heat;
• Do not use abrasives or substances or active agents for cleaning, because the surface can be damaged.

Plastic

Thanks to modern technology, plastic can look the same as natural materials - wood or stone.

For facades can be used plastic, different in thickness and quality. However, in any case, it is furniture of low or medium price category

Externally, plastic surfaces are similar to acrylic, but shine noticeably less

Pros:

• large selection of colors;
• long term of operation;
• resistance to moisture and high temperatures;
• resistance to mechanical stress;
• resistance to aggressive detergents;
• resistance to UV light;
• easy to clean.

Minuses:

• if the surface is glossy, yellow spots may be visible;
• matte surface is difficult to clean.

Enamel

Enamelled facades are made of medium-density wood-fiber panels, which allows you to give products any shape

These panels are primed, then coated with paint in several layers. The result is a coating that is resistant to external influences and attractive in appearance

Pros:

• simplicity in leaving;
• resistance to ultraviolet;
• wide selection of colors;
• You can apply complex patterns or drawings;
• environmental friendliness.

Minuses:

• relatively high price;
• uniformity of coating;
• chips caused by improper use cannot be restored.

Lamination

As a rule, the chipboard material is taken as the basis of the laminated facades. Its top layer is covered with a laminating film for a beautiful appearance.

Perfectly smooth laminated surfaces look impressive, but quite easily soiled and require careful handling

If you don’t want to spend a lot of time washing fingerprints, better consider other options for facades

Pros:

• low cost;
• accuracy of appearance;
• It lends itself well to processing with a power tool;
• Large selection of colors, textures and patterns.

Minuses:

• thin coating, high probability of mechanical damage;
• do not use abrasive products or those containing acid;
• sensitivity to high temperatures;
• loose structure of the base (over time, the fastener material sags).

Acrylic

This is a relatively new technology.The edges of such facades are usually made of aluminum edging or acrylic edge.

Acrylic plastic - the most durable and environmentally friendly type of coating for kitchen facades

Acrylic facades come in a variety of colors, but always only deaf, without any milling and panel

Pros:

• aesthetics of appearance;
• durability of use;
• moisture resistance;
• heat resistance;
• resistance to ultraviolet radiation;
• resistance to mechanical stress;
• visual increase in kitchen due to gloss;
• the ability to eliminate scratches by polishing;
• easy to clean.

Minuses:

• surface requires particularly careful handling;
• radius elements cannot be created;
• relatively high price.

Decorative glass

For glass facades, tempered glass or triplex glass is usually used. The advantage of the latter is that if the glass breaks, it will not break into fragments. The color of the glass can be any: transparent, colored, with decor, patterns, printed images, film or matting paste.

Glass can be placed in frames made of wood, aluminum, particleboard or MDF

Glass facades are often combined with other materials.

Since glass is a transparent material, additional hidden lights can be added to the kitchen interior, which can be placed in head cabinets.

The interior with glass facades looks sophisticated, elegant and weightless.

Additional Information. The ends are usually framed by an aluminum profile frame. This protects them from chips and adds aesthetics to the appearance of the facade.

Pros:

• large selection of colors;
• large selection of glass;
• long term of use;
• resistance to mechanical stress and chemicals;
• moisture resistance;
• resistance to temperatures;
• environmental friendliness;
• the ability to use the backlight.

Minuses:

• high price;
• the need for careful care;
• heavy weight;
• may break;
• chips cannot be restored.

The high cost of glass facades is made up of the cost of the glass itself and the price of special fittings

An unusual way to diversify the interior of the kitchen is to choose mirror glass for the facade. A big minus of this option is the difficulty in cleaning, especially if there are children at home. But it looks very impressive and “eats” the massive furniture, and a bulky piece of furniture can literally disappear in space.

Popular color schemes

The color of the kitchen is one of the main components of the entire interior. It is the color scheme that sets the mood in the house, and you have to visit the kitchen often, and, therefore, you need to approach her choice with responsibility. It is also known that different shades affect our mood and even psychological state in different ways. By the way, color has an effect on appetite! For example, taste buds wake up from orange, bright green and red colors. Losing weight is definitely worth avoiding these colors. For proper planning of the gamut of cuisine, we will resort to the advice of specialists who will help find the current color scheme.

The choice of color scheme for kitchen facades depends on what effect you want to achieve

For example, eclecticism is especially relevant in design projects today: the foundation is one style, and creative elements from other styles complement it. The most popular are light shades: white or beige, diluted with color accents. Gray, green, red, yellow and purple are also popular.

Solid colored facades - the perfect backdrop for color accents, with which you can constantly change something in the interior of the kitchen

Using the color of the facade, you can visually change the proportions of the room. Light tones increase space, dark tones, on the contrary, hide

Check out the photos of the various kitchen facades to see what you like best.

Conclusion

Choosing a kitchen - front panels for it, color and design, rely on practicality and quality, comparing this with your financial capabilities. Then your kitchen will definitely serve you for a long time and will delight you with its appearance.

Video about choosing a facade for the kitchen

Photo: kitchens with facades for every taste