In the decoration of the bathroom, the curtain and the cornice on which it is attached occupy not the last place. The bar is needed to fix the curtains, films over the bathtub to avoid splashing water, limiting space for hygiene needs. It can be used to decorate a window in a bathroom. Cornices for the bathroom can be purchased ready-made, as well as order individual to your liking.
According to the installation method, curtain rods in the bathroom are ceiling and wall. Ceiling mounts are acceptable for concrete, slatted, plastic, plasterboard ceilings. The fastener of the strap in this case will not cause great difficulties. If the ceiling is stretch, it is better to refrain from such a model of the crossbar in order to avoid damage. The choice of ceiling-mounted cornices is extremely limited. You cannot fix a non-standard angular, semicircular cornice in this way.
Wall mounting the crossbar is much more convenient, simpler, cheaper. The product lineup is very diverse, rich in colors, materials, configuration. Using such a fastener, it is just right to realize design ideas with the confidence that the installation will withstand a rather heavy curtain.
For greater safety, a more durable combination mount is often used (to walls and ceiling at the same time). The mounting mechanism option should be the same for the primary and secondary. Safety in the bathroom is an important requirement.
Materials for eaves in a bathroom
Content
Stainless steel - this option is widely used for the manufacture of crossbeams due to the fact that it is not afraid of moisture. This is the highest quality raw material and will last for many years. Polished steel is not susceptible to defects from sliding of the curtain mount rings. The most expensive of this type of raw material was polished steel models, combined with bathroom fixtures.
Aluminum cornice is lighter, quite moisture resistant. Its only drawback is its fragility in use, because of its lightness it is prone to deformation.
Plastic is the most budget option for a bathroom eaves. It has a rich color palette. The polymer cornice is quite light and cheap, it is also its drawback - such a bar is prone to bending.
A wooden cornice needs special treatment to become resistant to moisture. They are rarely used in practice at the insistence of project designers. Such elements belong to the elite class and will cost a lot.
Types of Cornices
The bathroom is the most important, intimate room and all the details in it matter. The design of modern bathing rooms requires original interior solutions. The eaves for a bathroom become a highlight in the decoration of the baths. Most often, a hollow metal tube with a diameter of 2-3 cm is used for a hanging bar. By the shape, type and value of the cornice for the bathroom is divided into:
- direct;
- angular;
- asymmetric;
- strings;
- round and oval;
- flexible and telescopic.
Direct cornice is the most common, affordable type of cornice, made of aluminum or plastic. Such a rod is mounted on opposite walls.The curtain on such a cornice moves unhindered, easily in both directions. In order not to experience difficulties during the installation of the cornice, you can choose a direct cornice with a spacer mechanism. In this case, the cornice is held due to the fact that it simply abuts against the walls under pressure.
A telescopic cornice is also called a pipe-to-pipe cornice. The slats of the structure are assembled from pipes of different diameters using a special clamp, they can be pulled to the desired length. At the ends of the telescopic bar are rubber gaskets that protect the walls from damage.
The expander bar is easily mounted - it is first stretched to the desired length plus 1-2 cm, then bursts between the walls above the bathroom. Such simplicity is provided by connecting the beginning and end of the rod with special springs. Rigidity of fastening is provided with a flange. The eaves expander widely fits into any interior of a bathroom.
The corner eaves for a bathroom can have the L-shaped and U-shaped. Such cornices are well suited for enclosing corner fonts and showers. The material for such a fence is a hollow metal pipe, which is attached to the bends of the desired configuration. Bronze is often present in a metal alloy to give greater strength and resistance to moisture. L-shaped cornice bent at right angles is more suitable for straight and corner baths. The U-shaped eaves are suitable for square bathtubs and fasten on one wall. If the structure is heavy enough, then additional fastening to the ceiling will be required. When choosing an angular rod, it is necessary to carefully, accurately determine the dimensions of the bathroom and the wall for fastening, since trimming the angular crossbar is quite difficult. Corner cornice is mounted to the walls using self-tapping screws.
Great grace and personality are distinguished by round and oval cornices. If the bathroom is installed in the center of the room, the closed structures look very original and protect against the widespread splashing of water and foam. The semicircular cornice well forms a bathing area with the same type of shower tray.
Radius cornice is chosen for fencing semicircular corner bathtubs and asymmetric plumbing. It has a slight bend and looks stylish in the interior of the bathing room. Set the radius of the cornice parallel to the walls of the bolts. Probably, the use of additional supports in order to prevent sagging of the structure under the weight of the curtain.
A flexible curtain rod can be used to bend complex geometric structures. This type of rods is made of high strength aluminum profile. It combines flexibility with rigidity, which greatly simplifies installation. The shape is attached by bending the bar through the knee. For fixing the cornice, the ceiling method is suitable, since several mounting points are required. Install the flexible rod carefully so that the surface does not crack.
Asymmetric models are chosen by those with a bathroom and the bathtub itself that have non-standard sizes. The use of a direct or radius cornice becomes impossible. Asymmetric rods easily adapt to any shape thanks to hinges, but rather bulky. Well suited when placing a font in a niche. Visually, they can be lightened by the curtain itself and the way it is suspended. Very often, such trims are made individually, depending on the shape of the bath.
String models were widely used. They are a fairly thin, but reliable, durable string. The string cornice is mounted on anchors screwed into the walls.Such a design looks very easy, original without a massive bar, while it is affordable and easy to mount. Well suited for minimalist high-tech bathrooms. Occasionally, a string will have to be pulled - it will eventually sag under the weight of the curtain.
Previously, the choice of cornice was determined by the shape of the bathroom. Now fantasies and the principle of combining the incongruous allow you to embody bold, original design ideas.
Modern models of cornices are presented in rich color, texture. Previously, white was preferred - now the rods are made with bronze, silver and even gold plating. These components are used to decorate the bathroom in the Baroque style, modern. Enamels are used as a coating.
When choosing a cornice, you must correctly calculate the height of the mount. The curtain for the bathroom should go into the bath itself at 20-25 cm. For a harmonious picture of the decoration of the bathroom, you need the plank, its fasteners, rings, eyelets for the curtain - everything should be done in the same color and style.
Rules for choosing a cornice for a bathroom
Households dream that the bathtub should look expensive and functional enough. Do not buy the first cornice. Before making a purchase, be sure to listen to the tips:
- Carefully measure the bathroom. The shape of its installation depends on the size of the bar.
- Decide on the option of attachment, depending on the material of the ceiling and walls. Make sure the cladding is strong so that you do not have to make a new repair later.
- Rate the severity and quality of the curtains. The richer the curtain looks, the more expensive the bar should look, so that their combination does not cause an imbalance in the interior. The texture and fittings must be combined with the interior.
- Make the right choice depending on the location of the font in the bathroom.
The times in which the bathroom was called a bathroom are long over. Now it is a full room with personality. Market, manufacturers immediately responded to new requirements. The eaves for a bathroom became a functional part of an interior, the necessary, obligatory accessory. When buying it, make sure the quality of the material, equipment and check the warranty.
DIY shower curtain rod